Conductivity
Description
Versions
Downloads
Description
Digital sensor to measure conductive conductivity especially in pure media, for operation on TriBox controllers and HS100 DIN G2 rail module. The digital technology ensures secure and interference-free signal transmission from the sensor to the controller.
Versions
Downloads
Benefits
- Reliable conductivity measurement with two conductive graphite electrodes and temperature compensation
- PVC sensor housing and graphite electrodes
- No mechanically moving parts
- Immediate installation and easy maintenance
Areas of application
- Measurement of conductivity in the outlow of wastewater treatment plants
- Measurement of conductivity in industrial and water circuits
Parameters
- Conductivity
- temperature
Request now
Do you need individual advice or are you interested in the conductivity sensor?
Technical Data
Technical Data
Technical Data
| Measurement technology | Conductivity | |
| Measurement principle | Conductivity with two graphite electrodes | |
| Parameter | Conductivity | |
| Measurement range | 0.00 µS… 20000 µS | |
| Measurement accuracy | ±0.5 µS at 20 µS | |
| ±5 µS at 200 µS | ||
| ±50 µS at 2000 µS | ||
| ±500 µS at 20000 µS | ||
| Response time | T90 < 60s | |
| Temperature compensation | Via NTC | |
| Housing material | PVC housing, graphite electrodes | |
| Dimensions (L x Ø) | 220 mm x 33 mm | ~ 8.7“ x 1.3“ |
| Interface | RS-485 (Modbus RTU) | |
| Power supply | 12…24 VDC | |
| Connection | 8-pin M12 connector, cable length 2 m or 10 m | |
| Maintenance interval | 2 years | |
| System compatibility | Modbus RTU | |
| Warranty | 1 year (EU & US: 2 years) on electronics; | |
| wear parts are excluded from the warranty | ||
| Process pressure | 10 bar | ~ 145 psig |
| Calibration method | One-point calibration with standard measuring solution | |
| Process temperature | 0…50°C | ~ +32 °F to +122 °F |
