The Modbus interface controls the sensor interfaces of the TriBox3, TriBox Mini or the TriOS G2 sensors with connectors, providing simple, flexible connection options. The TriBox is connected via a standard M12 extension cable. TriOS G2 sensors with M12 connectors can be connected directly. To operate the sensors, a power supply must be connected to the interface, which is connected directly to the sensor. Additional mounting holes in the aluminium L profile make installation easy.
Do you need individual advice or are you interested in the Modbus Interface Board?
Voltage supply | 12…24 VDC (+/- 10%), only required for operation with sensors | |
2 pin PCB plug connector | ||
G2 sensor connector | 1 M12 built-in socket | |
G2 sensor serial tap | 4 pin PCB plug connector | |
G2 sensor network tap | 1 RJ-45 socket, standard: IEEE 802.3i (10BaseT) | |
TriBox connection | 1 M12 built-in plug, connection via standard M12 extension | |
TriBox serial tap | 4 pin PCB plug connector | |
Operating temperature | 0…+40 °C | ~ +32 °F to +104 °F |
Storage temperature | -20…+70 °C | ~ -4 °F to +158 °F |
Relative air humidity | 0…95 % (non-condensing) | |
Protection type | IP10 | NEMA 1 |
Dimensions (width x height x depth) | 110 x 40 x 95 mm | ~ 4.3˝ x 1.6˝ x 3.7˝ |
Weight | 180 g | ~ 0.4 lbs |
Material | Aluminium |
TriOS Mess- und Datentechnik GmbH
Bürgermeister-Brötje-Str. 25
26180 Rastede
phone +49 (0)4402 69670-0
fax +49 (0)4402 69670-20